Color rubbed off on PU synthetic leather

I have an HP 375, we bought it to print on PU synthetic leather. Colors print nicely, but when I apply glue on the back and make it into a notebook cover, the color rubs off easily. Even when I don't apply glue on the back of PU, printed color still rubs off easily. Has anyone else also print on sythetic leather before and had the same problem.

Hello @tina.orientalace Which media profile are you using? Does it happen the same while printing on other media?

Was this helpful?Yes1 No0

100% of users thought this content was helpful.

How can we improve it?

SubmitCancel

#2 we have tried using Alpha3 TD603, since this is the only recommended choice for PU leather. Then we've also tried several others because we prefered result using 16P and with Alpha3 TD603 highest pass allowed is only 12P. At the end we modified HP light textile display banner to 16P 150icc. Person who sold us this machine recommended us increase temperature and increase to 20-24P. As well as increase percentage on OP. So far we have increase temperature, but we have not found where to increase OP. We've also printed on paper and Canvas, but PU leather is the only one that's giving us problems.

Was this helpful?Yes1 No0

100% of users thought this content was helpful.

How can we improve it?

SubmitCancel

#4 Hi, to edit the optimizer level, just select edit the profile in the substrate library, there is a advance tap at lower left corner, then you will find the optimizer level there.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

We've tried using 35% optimizer. After it's done printing, we used an eraser to check if colors fade again and as you can see on the picture that after using eraser on the PU color fades. I know it' s not normal to use eraser on PU, but it's really important that color stays on when with friction.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Hello @tina.orientalace I can recommend the profile of another PU Synthetic leather, it has a profile for the HP Latex 500 Printer Series. ENDUTEX Skinprint FR https://www.printos.com/ml/#/medialocator/147125 However, the durability of this material also has certain limitations, I don't know if it will be enough. To improve it, there is only one option: applying a liquid Topcoat / Varnish. I hope this information helps.

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel

Thank you Sonia, We've decided to go with your recommendation, we'll be applying varnish on top to prevent any discoloration on PU. It's quite a relive to finally found a solution. Thanks again.

Was this helpful?Yes1 No0

100% of users thought this content was helpful.

How can we improve it?

SubmitCancel

#8 What varnish did you use?

Was this helpful?Yes0 No0

How can we improve it?

SubmitCancel